125 to 185 CFM Genair® Rotary Screw Air Compressor/Generator

Vanair’s Genair® is an integrated rotary screw air compressor and weatherproof generator. Providing up to 185 CFM of air power and 9.6 kW of AC power. Eliminating the need for separate engine-drive air compressors, generators or power inverters, the Genair® is easily mounted to the truck’s frame rail. The Totally Enclosed Fan Cooled (TEFC) generator has a high protection degree against dirt, grime and salt and is the ideal choice for harsh environments.

Product price
Additional options total:
Order total:

Parts Order Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Schedule Service Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Please note! Appointment is not final until we provide an appointment confirmation.

Generator
Output (Continuous) (kW) 6.6 OR 9.6
Voltage 120 or 120/240 120 or 120/240
Phase Single Phase Single Phase
Speed (RPM) 3600 3600
Protection Degree IP54 IP54
Type Brushless AVR Brushless AVR
Weight (Lbs.) 72 92

 

Air Compressor
Capacity (CFM) 125 160 185
Air (PSI) 100-150 100-150 100-150
Air Compressor Input (RPM) 1535 1880 2160
Air Compressor Oil Capacity (Gal.) 2.5 2.5 2.5
Dry Weight – Mounted (Lbs.) 513 513 513-554

Dimensions with fittings (In.) – 10D x 14.25L (6.6 kW), 16.25L (6.6 kW)

Dimensions listed are not a complete representation of total space necessary.  Please consult Vanair for overall space and air requirements.

Gear box dimensions with fittings (In.) – 14.75 H x 10.06 D

Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.

Air Compressor

  • Lifetime Warranty on Air End
  • 100,000 Hours Design Life
  • 100% Duty Cycle
  • Greater Efficiency for Lower Engine RPMs
  • Integrated Inlet Valve and Rear Discharge Provides Higher Ground Clearance
  • Made in the USA

GENERATOR

  • Totally Enclosed Fan Cooled Sealed Generator
  • No Brushes for Maintenance-Free Operation
  • Automatic Voltage Regulation (AVR) Regulates to Within ± 2%
  • 6.6 kW to 9.6 kW Producing 120 or 120/240V at a Constant 60 Hz
  • Ground Fault Circuits and Outlet Panels Available to Meet Your Needs

Discharge System

  • Intank Coalescer System Provides Greater Surface Area for Increased Oil Separation
  • Coalescer is Protected from the Elements, Eliminating the Possibility of Rust or Damage from External Source
  • Less Prescribed Maintenance and Waste Oil Recovery Costs
  • Less Than 2 PPM Oil Carryover
  • Pressure Rated to 250 PSIG
  • 5 Year Warranty or 3000 Hours for Replacement on Coalescer Element Only
  • Smaller Tank Design Makes Installation Easier
  • Streamlined Fittings on the End of Tank
  • ASMA and CRN Certified

Air Filter

  • ABS plastic housing
  • Dual stage

SAE B PAD

  • Limited to 77 Ft. Lbs.

Cooler(s)

  • Capable of Cooling Up to 200 CFM at Up to 175 PSI
  • Air to Oil Heat Exchanger Driven by 12V Fan

Instrumentation
VANAIR TOTAL ELECTRONIC CONTROL SYSTEM (V-TEC™)

Diagnostic Monitoring Display Includes:

  • Remote Engine Speed Control
  • Built-In Safety Features
  • Complete Startup & Shutdown Capabilities
  • Oil Temperature & Air Pressure System Checks
  • Troubleshooting & Maintenance Display Assistance & Alerts
  • LCD

Vanguard™ Rotary Screw Compressor Oil

  • Full Synthetic Oil Exclusively Created for Rotary Screw Compressors
  • Flash Point: 257 °C/495 °F
  • Pour Point: -45 °C /-50 °F
  • Outstanding Thermal and Oxidative Stability
  • Reduced Oil Disposal Due to Extended Drain Intervals

Safety Equipment

  • High-Temperature Shutdown
  • High-Pressure Shutdown
  • Air Pressure-Relief Safety Valve
  • Minimum Pressure Valve
  • Automatic Blowdown on Shutdown
  • Oil Fill Plug Safety Relief