80 XL Barko Hydraulics Loader

Like all Barko products, it provides increased work productivity and the lowest total cost of operation than any other product on the market.

Product price
Additional options total:
Order total:

Parts Order Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Schedule Service Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Please note! Appointment is not final until we provide an appointment confirmation.

Barko Hydraulics 80XL Loader supplied by Truck Utilities, there’s no disputing it, the Barko 80XL Back of Cab knuckleboom loader (material handler) delivers the highest payload with the lowest installed weight ratio.

And it doesn’t stop there.

Equipped with more standard features than its competitors, the 80XL lasts longer, performs harder, and delivers the results you expect. There’s nothing better than a Barko!

Max Lift Capacity

  • 22′ 0″ (6.70), straight boom, less attachment:

Radius Lift

  • 5′ (1.52 m) 9,880 lbs. (4,481 kg)
  • 10′ (3.05 m) 9,550 lbs. (4,331 kg)
  • 15′ (4.57 m) 6,620 lbs. (3,002 kg)
  • 20′ (6.10 m) 5,010 lbs. (2,272 kg)
  • Full Reach 1,940 lbs. (879 kg)

Boom Data

  • Standard 22′ straight boom lengths: 22’0″ (6.70 m)
  • Main 12′ 0″ (3.66 m)
  • Stick 10′ 0″ (3.05m)

Boom Structure

  • Fabricated box style design with all welded construction
  • Aluminum Bronze Bushing with grease grooves at boom pivot points
  • 2-55W Halogen Work Lamps on Stick Boom
  • Boom Reach (mounted on a 44″ truck frame.)
  • Standard 22′ straight boom lengths: 22′ 0″ (6.70 m)
  • Horizontal 21′ 10″ (6.66 m)
  • Vertical 34′ 5″ (10.49 m)

Cylinders

  • Hydraulic cylinders with spherical bearings and wear rings on glands and pistons for long wear
  • All cylinders are made of heavy wall honed steel tubing. Heat treated cylinder rods have heavy chrome plating
  • Main and stick boom cylinders have induction hardened rods and bolt on glands
  • Main boom cylinder: 5″ x 36″ (127mm x 914.4mm) with 3″ (76.2mm) rods.
  • Stick boom cylinder: 5″ x 30″ (127mm x 762.0mm) with 2.5″ (63.5mm) rods

Power Source

  • Customer supplied Power Take Off

Hydraulic System

  • 45 gallon (170 L) hydraulic reservoir with both suction and return line filters
  • Pump: One triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1500 RPM
  • Heavy-wall tubing and 4-wire hose throughout system
  • Main system operating pressure 3200 PSI (200 BAR)
  • Control valves: sectional fine control type with mechanical joysticks
  • Independent swing circuit
    Rotary 5 port manifold to allow continuous rotation

Swing System

Continuous rotation on 27″ (685.8 mm) external tooth turntable bearing powered by a hydraulic motor and a single stage planetary gearbox

Operator’s Platform

  • Rotating platform with beneath-the-seat style valve mounting and foot swing pedal
  • Comfortable, locking, fold-down seat with arm rests
  • 8-Pass electrical collector

Stabilizers/Subframe/Pads

  • Telescopic stabilizers with 43″ (1,092mm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates
  • Controlled from platform or ground

Mounting Data

  • Mounting bolts and support plates are supplied

Miscellaneous

  • Weight: Loader with standard boom with cylinders (excluding grapple and options): 5,305 lbs. (2,406 kg)
  • Dual ladders with non-slip treading
  • Load securing posts

Options/Accessories

  • Spacers to accommodate various frame heights
  • Oil Cooler Kit with 12V Fan