Stanley “CT”Crimpers

Crimping connectors with the Stanley Hydraulic Tools CT Series crimpers is quick and easy.

$2,394.75$5,150.00

Clear
Product price
Additional options total:
Order total:

Parts Order Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Schedule Service Form

If this is an emergency, please contact our service department at (800) 869-1075 or locate the location nearest you on our locations page.

Please note! Appointment is not final until we provide an appointment confirmation.

Handheld Hydraulic Crimping Tools

Models CT06/CT10/CT15

They are 5-10 times faster than hand-pumped tools and more than twice as fast as high pressure double acting crimpers.

The CT Crimpers require no booster or intensifier which means they can be operated directly from the hydraulic circuits already installed on your line trucks, or from a dedicated power unit, or from one of the STANLEY® lightweight, portable HP Power Units.

Swivel Design on all models provides 360° continuous rotation of the die head for easy alignment to give higher quality crimps.

1650 Models allow the use of the CT on almost any hydraulic system of at least 1,650 psi (114 bar). An accurate, built in relief valve ensures that at these system pressures and higher, a full die load is achieved preventing over-crimping.

CT06

The CT06 is a 4-point dieless crimping tool with a capacity of up to 750 MCM aluminum cable or 500 MCM copper cable.

CT06  uses a Die-Less head. It is Compatible with the following tooling and die application:

Anderson, VC6-FT, VC6-FTV, VC6-FTR, and VC6-FTVR

CT10

CT10 Burndy accepts standard Burndy U-type dies. It is compatible with the following tooling and die application:

Burndy, Y35, L, H
Alcoa, 12A, 12AC, 12HA, 12HAC and 30A
Anderson, HC-12 and HC-12H
Greenlee, 1985
Huskie, EP410, EP410T, EP430, EP510, EP410HT, RP410H, EP510H, PDY-1220 and PDY-1216
Thomas & Betts, 12 Ton
Teledyne, TPU-12 BH

CT10 Kearney

CT10 Universal head crimper has a C-type head that uses die holders which allow the tool to accommodate either standard “U” style dies, Kearney dies, or T&B tooling

CT10 Kearney accepts standard Kearney dies. It is compatible with the following tooling and die application:

Kearney, PH2, WH3
Huskie, EP510K and EP510HK

CT10 STANLEY®

CT10 STANLEY® 1½ in. with its unique C-frame opening of 11/2 inches permits the operator to crimp material up to 750 MCM aluminum or copper cable. The larger opening can eliminate the need for larger, more expensive 15 ton tools when crimping large connectors that don’t require 15 tons of die load. The CT10 STANLEY® accepts standard Burndy U-type dies. It is compatible with the following tooling and die
application:

Burndy, Y35, Y750 BH
Alcoa, 12A, 12AC, 12HA, 12HAC and 30A
Anderson, HC-12 and HC-12H
Greenlee, 1985
Huskie, EP410, EP410T, EP430, EP510,
EP410HT, RP410H, EP510H, PDY-1220 and PDY-1216
Thomas & Betts, 12 Ton

 

CT15 Universal

CT15 Universal head model uses die holders that allow the tool to accommodate either Burndy, Kearney or T&B tooling. It will accept the following dies:

Burndy, Y46, Y35
Kearney, PH2, PH14